Step Action
7 Unlock the pin locks on all large pinch valves.
8 Turn the installation switch to the R
un position. Then press the Reset but-
ton.
9 The flow kit is assembled and the system can be prepared for the relevant
flow kit installation test, see Section 5.3 Perform flow kit installation test, on
page 123.
5 Preparation
5
.2 Install disposable flow kits
122
ÄKTA ready XL Operating Instructions 29281616 AE
*** TeDIS Valid on Date Printed Printed on: 15-09-2023 11:27:35 ***
To Next Page
Loading...
