The flow kit serial number is found on the label of the transport box.
Prepare the system for flow kit
i
nstallation
Step Action
1 Unlock all large pinch valves on the system by setting each locking pin to
t
he unlocked position.
Note:
T
he valves are located on three sides of the system.
2 Turn the installation switch to F
lowkit install.
5 Preparation
5
.2 Install disposable flow kits
98
ÄKTA ready XL Operating Instructions 29281616 AE
*** TeDIS Valid on Date Printed Printed on: 15-09-2023 11:27:35 ***
To Next Page
Loading...
