Troubleshooting
2001989-203C ApexPro™ Telemetry 6-15
132A
4. View the network activity information for the VRTP packets on the VRTP
Statistics screen. This screen provides the following information:
Viewing access point statistics
To view access point statistics, follow these steps.
1. Log onto the Webmin service interface on page 4-7.
2. Select the Diagnostics tab.
3. Select Device Master > AP Statistics.
133A
4. View the network activity information for the access point on the AP Statistics
screen. This screen provides the following information:
Column Description
Transceiver The transceiver ID.
RX The number of good VRTP packets received.
CRC Errors The number of VRTP CRC errors detected.
Frame Errors The number of VRTP frame errors detected.
Sequence Errors The number of VRTP sequence errors detected.
ReXmits The number of VRTP re-transmissions that were detected.
O/R The number of over run errors detected.
U/R The number of under run errors detected.
To Next Page
Loading...
Need help?
General
