3 Preparations for operation
12 GE Healthcare 86500-IMG rev 3
3.4.2 Insertion and removal of compression paddles
3.4.2.1 Insertion
1 Insert the required paddle into the holes on the compression arm
and push the paddle horizontally until it locks. Insert the paddle so
that the longer pin of the two slides into the right-hand hole.
2 The inserted compression paddle looks like this.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
