7 Menu options
86500-IMG rev 3 GE Healthcare 57
7.2.2 Setup mode
This mode enables feature programming.
1Choose SETUP from the menu screen:
The following screen appears:
Scrolling the list, you find the options Date/Time and Display.
2 Set system date and time with the Down, Next and Up keys in the
Date/Time screen:
3 Adjust brightness and contrast of the LCD-display with the Down,
Next and Up keys in the Display screen:
The control panel display screen brightness and contrast can each be set
in the range from 0 to 5. After completing the set-up, the system prompts
you to confirm the changes:
4 Press the SET key to accept the changes, or cancel the changes with
the Cancel key.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
