Copyright Code: 86500-IMG rev 3 Date: 11/2006
Copyright © 2000 by General Electric Company Inc. All rights reserved.
Manufactured by GE Healthcare Finland Oy
Kuortaneenkatu 2
FIN-00510 Helsinki
FINLAND
Tel. +358 10 394 6500
Fax. +358 10 394 6501
GE Healthcare Finland Oy, a General Electric company, going to market as
GE Healthcare.
Documentation, trademark and the software are copyrighted with all
rights reserved. Under the copyright laws the documentation may not be
copied, photocopied, reproduced, translated, or reduced to any electronic
medium or machine readable form in whole or part, without the prior
written permission of GE Healthcare.
Windows
®
is trademark of Microsoft Corporation in the United States of
America and other countries. HyperTerminal is a trademark of Hilgraeve
Inc, Monroe, MI, USA.
The original language of this manual is English.
General Electric Company reserves the right to make changes in
specification and features shown herein, or discontinue the product
described at any time without notice or obligation. Contact your GE
representative for the most current information.
Internet and Service: http://www.gehealthcare.com/worldwide.html
This manual applies to Diamond units with software version 1.02.5 and
up.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
Need help?
General
