EasyManua.ls Logo

GE Diamond - General Output Rating and Duty Cycle

GE Diamond
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11 User’s Statement Of Model Diamond
84 GE Healthcare 86500-IMG rev 3
General Output Rating and Duty Cycle:
At 230 VAC nominal:
Large Focal Spot 100 mA at 25 kV, 70 mA at 35 kV
Small Focal Spot 30 mA at 23 kV, 20 mA at 35 kV
Exposures are automatically limited if the tube or housing heat capacity
counter is activated.
Tube protection counter:
Anode:
Heating = kV x mAs = Joule (increased only during exposures)
Cooling = 30 Joule / sec. (decreased continuously)
Housing:
Heating = kV x mAs = Joule (increased only during exposures)
Cooling = (decreased continuously) refer to the diagram in Chapter 12.3,
Housing heating and cooling curves
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).

Table of Contents

Related product manuals