GE Discovery NM/CT 670 - Page 63

Equipment Description and General Construction Requirements 2.2 Room Size, Layout and Considerations
2.2.2 System Layout Drawings
Discovery NM/CT 670 – Standard Integration Instructions
5483063-1EN, Rev.2, ©2015 GE Healthcare 2-20
Figure 2-13:Typical Square Layout
 Enables installation, operation
and service of the system in safe
conditions
 Enables relative freedom of
movement for operator and
service, with operator access on
both sides of the system
 Includes three collimator carts
 Console in operator room is
positioned to the side; site must
provide means such as closed
circuit camera or mirrors to allow
the operator to see into the bore.
EMO