GE F650 User Guide

GEK-113000AE F650 Digital Bay Controller 4-3
4 SECURITY 4.3 ENABLING SECURITY
4
4.3ENABLING SECURITY
EnerVista 650 Setup Security Control is disabled by default. Users don't have to log in through user name and password
after installation and are granted access as Administrator.
Security Control can be enabled through Security from the tool bar when logged on as an Administrator. Click on User
Management and a dialog box will show up.
Figure 4–2: SECURITY ENABLING
Security Control is enabled by checking the ENABLE SECURITY check box. The first time the enable security option is
selected is necessary to close and open EnerVista 650 Setup to start working under security management.

GE F650 Specifications

General

Model	F650
Category	Controller
Frequency	50/60 Hz
Display	LCD
Type	Feeder Protection Relay
Application	Feeder Protection and Control
Communication Protocols	DNP3, Modbus, IEC 61850
Protection Functions	Overcurrent, Earth Fault
Manufacturer	General Electric
Input Voltage	24-250 VDC/VAC