GEK-113000AE F650 Digital Bay Controller 5-7
5 BOOTCODE AND FIRMWARE UPGRADE 5.1 UPGRADE FROM VERSION BELOW V7.00.
5
Figure 5–11: BOOT CODE FILE SELECTION
14. Choose the bootware file and click Open button. The next screen will pop up:
:
Figure 5–12: LOADING BOOT CODE FILE
15. Then the program shows a message requiring switch OFF and ON the relay while the progress bar is in course, to start
the upgrading process.
Figure 5–13: RELAY SWITCH OFF-ON MESSAGE
To Next Page
Loading...
