GE F650 - Page 229

GEK-113000AE F650 Digital Bay Controller A-9
APPENDIX A A.1 LOGIC OPERANDS
A
OPERANDS - F650 - MODEL FX - GX
INTERNAL SYSTEM STATUS (CONT.)
Oscillography States
OSC DIG CHANNEL 1
Oscillography Digital channel 1 : (1) Active ; (0) Not
Active
OSC DIG CHANNEL 2
Oscillography Digital channel 2 : (1) Active ; (0) Not
Active
OSC DIG CHANNEL 3
Oscillography Digital channel 3 : (1) Active ; (0) Not
Active
OSC DIG CHANNEL 4
Oscillography Digital channel 4 : (1) Active ; (0) Not
Active
OSC DIG CHANNEL 5
Oscillography Digital channel 5 : (1) Active ; (0) Not
Active
OSC DIG CHANNEL 6
Oscillography Digital channel 6 : (1) Active ; (0) Not
Active
OSC DIG CHANNEL 7
Oscillography Digital channel 7 : (1) Active ; (0) Not
Active
OSC DIG CHANNEL 8
Oscillography Digital channel 8 : (1) Active ; (0) Not
Active
OSC DIG CHANNEL 9
Oscillography Digital channel 9 : (1) Active ; (0) Not
Active
OSC DIG CHANNEL 10
Oscillography Digital channel 10: (1) Active ; (0) Not
Active
OSC DIG CHANNEL 11
Oscillography Digital channel 11 : (1) Active ; (0) Not
Active
OSC DIG CHANNEL 12
Oscillography Digital channel 12 : (1) Active ; (0) Not
Active
OSC DIG CHANNEL 13
Oscillography Digital channel 13 : (1) Active ; (0) Not
Active
OSC DIG CHANNEL 14
Oscillography Digital channel 14 : (1) Active ; (0) Not
Active
OSC DIG CHANNEL 15
Oscillography Digital channel 15 : (1) Active ; (0) Not
Active
OSC DIG CHANNEL 16
Oscillography Digital channel 16 : (1) Active ; (0) Not
Active
OSCILLO TRIGGER Oscillo trigger activation (1) Active ; (0) Not active
Fault Report (Fault locator)
FAULT REPORT TRIGG Fault report trigger (1) Active ; (0) Not active
CLEAR FAULT
REPORTS
Fault report removal from HMI and ModBus (volatile
memory)
Energy Counters
FREEZE ENERGY CNT Energy counter freeze
UNFREEZE ENERGY
CNT
Energy counter unfreeze
RESET ENERGY CNT Energy counter reset
Demand Inputs
DEMAND TRIGGER INP Demand trigger (for Block interval algorithm)
DEMAND RESET INP Demand reset