3-26 F650 Digital Bay Controller GEK-106310AE
3.1 ENERVISTA 650 SETUP SOFTWARE INTERFACE 3 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES
3
This section shows the settings related to inputs and outputs for the different boards available in F650 (F, G, H, J).
Table 3.16: GENERAL OVERVIEW OF “INPUTS/OUTPUTS>CONTACT I/O” SETTINGS MENU.
3.1.8.7 QUICK SETTINGS
This menu allows a quick access to the main Setpoints of the relay.
Figure 3–11: QUICK SETTINGS
CONTACT I/O
Board F Board located in first slot, always connected.
Board G
Board located in second slot, depends on model definition. If model is
type G0 there is no board in second slot.
Board H Board located in first slot of CIO Module (external inputs/outputs module)
Board J
Board located in second slot of CIO Module (external inputs/outputs
module)
To Next Page
Loading...
