Chapter 12 - - Set Preferences Page 255
GE H
EALTHCARE
D
IRECTION 5461425-8EN, REVISION 6 BRIVO XR118 SERVICE MANUAL
Add or Edit Network Host
Adding and editing network hosts use very similar process and the same screens
as shown in Figure 12-4 and Figure 12-5. Table 12-1 and Table 12-2 describe the
fields in detail.
• If editing an existing connection, select the network host and click [Edit].
• If adding a new connection, click [Add].
Complete requested information for both tabs and click [Save] to add the
network host or save the changes.
Figure 12-4 Add Network Host - Host tab
Table 12-1 Add Network Host – Hosts tab description
Function Description
Host Label
The name of the host that appears in the Network Hosts lists
and on the Image Management screen.
Note: Host labels cannot have spaces in the name. Use underscores
( _ ) to separate words.
Application Entity
Title
Type in DICOM AE.
Network Address The IP address of the network host.
Port Number The port number for the network host.
Query Retrieve
Sets the type of information the host will provide on query
from another host. Available options are:
• No provider
• Study
• Patient
Storage Commitment Designates if the host will store image data.
To Next Page
Loading...
