3.4.5 Cable Support for Monitor Cables
A cable support (cable drape) is provided with an Innova LC System.
The cable support kit contains:
•
1 B2054 EK (Drape with 3 M Bridge, on suspensions for X-Ray tubes and monitors, contains
8 FT 6 inch track, three carriers, and mounting hardware)
•
1 B2055 ED (stationary rail parts)
NOTE:
In Americas the Cable Support Kit must be provided locally by the Customer (e.g.
CPGE55 from Unistrut).
3.5 Walls
3.5.1 General requirement
The C1 Cabinet, the C2 Cabinet, and the PDB Cabinet must be securely fastened to the wall to
prevent them from tipping.
3.5.2 Seismic Areas
NOTE: For Fluoro UPS option (US version only), the Fluoro UPS supplier will deliver anchoring
brackets (see Illustration 3-12). The bolts will be provided by the customer.
Consider local seismic codes when planning cabinet mounting. Consult seismic expert to
determine which mounting method is appropriate for the seismic region. Certain seismic regions
require additional reinforcement in walls. See Chapter 2, Section 3, Basic Innova System
Compatibility for referential documents.
Illustration 3-12:
Innova 2100-IQ, 3100/3100-IQ, 4100/4100-IQ Cardiovascular Imaging System Pre-Installation Manual
GE Healthcare Direction 5160944-13-1EN, Revision 2
Chapter 3 Physical Requirements of Room 77
To Next Page
Loading...
