Loading the software
LOGIQ C9 Series – Basic Service Manual 8-17
5482298-100 English Rev. 5
Loading the System Software with USB memory stick/DVD (continued)
• To select [b], only the bootable C: partition is loaded.
This option is intended for recovery of a system that will
not boot up. It is not recommended for application
software upgrade because during upgrade process, the
data on the system would possibly be impacted.
NOTE: If you upgrade the software from R1.0.x to R1.1.x, DO
NOT select [2] for loading C disk only.
• To select [c] to quit system upgrade process.
Figure 8-7. System Software load instruction
While the software install procedure is designed to
preserve data, you should select choice [b] to format disk
C only.
To Next Page
Loading...
Need help?
General
