GE LOGIQ S8 User Manual

GE HEALTHCARE PROPRIETARY TO GE
D
IRECTION 5394227, 12 LOGIQ S8/LOGIQ E8 SERVICE MANUAL
3 - 80 Section 3-12 - Configuring Connectivity
3-12-8 Instructions for setting up Network Storage on LOGIQ S8 R4 (cont’d)
3.) On the Service Tab, select the Destination Device, “My Computer” Select Service Type to Add,
select USB Quick Save, then “Add.” and then Save.
4.) Assign Network Storage to USB Quick Save under Destination Device, My Computer, on the
Service Tab, select Destination Device My Computer, click on USB Quick Save, then click on the
down arrow under Properties and select NetworkStorage, then click on Save.

GE LOGIQ S8 Specifications

General

Type	Ultrasound System
Display Type	LCD
3D/4D Imaging	Yes
Connectivity	DICOM, USB, Ethernet
Display Size	19 inches
Transducers	Linear, Convex, Phased Array
Doppler Modes	Color Doppler, Power Doppler, Spectral Doppler
Operating Modes	B-Mode, M-Mode
Applications	Abdominal, Cardiac, Obstetrics, Gynecology, Vascular, Musculoskeletal
Portability	Cart-based
Transducer Ports	4