GE HEALTHCARE PROPRIETARY TO GE
D
IRECTION 5394227, 12 LOGIQ S8/LOGIQ E8 SERVICE MANUAL
Section 3-12 - Configuring Connectivity 3 - 81
3-12-8 Instructions for setting up Network Storage on LOGIQ S8 R4 (cont’d)
5.) Select Button Tab. Select a Print Button, then add the USB Quick Save to the Printflow View by
selecting >>. If Copy to Dataflow is in PrintFlow View, remove by selecting <<, then click Save.
NOTE: It takes a long time to access Network Storage Service by the condition of the network.
To Next Page
Loading...
