GE LOGIQ S8 User Manual

GE HEALTHCARE PROPRIETARY TO GE
D
IRECTION 5394227, 12 LOGIQ S8/LOGIQ E8 SERVICE MANUAL
Section 4-3 - General procedures 4 - 13
4-3-8 Moving and Transporting the LOGIQ S8
4-3-8-1 Before moving the system
When moving or transporting the system, follow the precautions below to ensure the maximum safety
for personnel, the system, and other equipment.
CAUTION
When the system is not in use AND/OR before moving/transporting the system, make sure that
the control panel/the monitor arm lock firmly and flip down the monitor to prevent system
damage.
CAUTION
DO NOT place probes or the footswitch into the side tray when moving/transporting the system.
It is not storage space for probes, footswitch and any peripheral devices.
CAUTION
If you park the system on a slippery slope, you MUST use the brakes on the wheel.
CAUTION
This equipment is not to be used during transportation (e.g. ambulance cars, aircraft).
CAUTION
DO NOT attempt to move the console using any cables or fixtures, such as the probe
connectors.
CAUTION
Handle carefully. A drop of more than 5 cm can cause mechanical damages.

GE LOGIQ S8 Specifications

General

Type	Ultrasound System
Display Type	LCD
3D/4D Imaging	Yes
Connectivity	DICOM, USB, Ethernet
Display Size	19 inches
Transducers	Linear, Convex, Phased Array
Doppler Modes	Color Doppler, Power Doppler, Spectral Doppler
Operating Modes	B-Mode, M-Mode
Applications	Abdominal, Cardiac, Obstetrics, Gynecology, Vascular, Musculoskeletal
Portability	Cart-based
Transducer Ports	4