GE HEALTHCARE
DIRECTION 5394227, 12 LOGIQ S8/LOGIQ E8 SERVICE MANUAL
7 - 2 Section 7-2 - Service Platform
Section 7-2
Service Platform
7-2-1 Introduction
The Service Platform will increase service productivity and reduce training and service costs.
7-2-2 Access / Security
The Service Platform has different access and security user levels. Each user is only granted access to
the tools that are authorized for their use.
• Local Access (R1 to R4): via Utility - Service
• Remote Access to Service Platform: This offers GE technicians the possibility to view the entire
customer’s desktop and operation system. Remote access to the LOGIQ S8 requires permission
and customer input to run diagnostics.
7-2-3 Local Access (R1 to R4)
1.) If not already in read mode, freeze the image.
2.) Select Utility on the Touch Panel and then touch Service. Service Login opens.
3.) Select “Operator” from the pull-down menu, enter the password “uls” and then click Okay.
4.) GEHC Service Home Page appears.
The Common Service Desktop (CSD) is started and the Home page - containing Basic System
Information - appears. The navigation bar at the top of the screen allows to select different tools.
For more detailed information and description, refer to Section 7-4 "Service Desktop (CSD) - R1 to
R4" on page 7-20 or Section 7-6 "Service Desktop (R4.2.5x and later)" on page 7-46.
Figure 7-1 Service Login (R1 to R4)
enter password: uls
select: Operator
To Next Page
Loading...
Need help?
General
