GE M60

CHAPTER 6: ACTUAL VALUES RECORDS
M60 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL 6-23
6
6.4.10 Transducer inputs and outputs
6.4.10.1 RTD and DCmA inputs
ACTUAL VALUES  METERING  TRANSDUCER I/O DCMA INPUTS  DCMA INPUT xx
Actual values for each DCmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.
ACTUAL VALUES  METERING  TRANSDUCER I/O RTD INPUTS  RTD INPUT xx
Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value.
6.4.10.2 RRTD inputs
ACTUAL VALUES  METERING  TRANSDUCER I/O RRTD INPUTS  RRTD INPUT 1(12)
Actual values for each RRTD input channel that is enabled are displayed this menu. The top line the programmed RRTD ID
and the bottom line displays the metered value.
6.5 Records
6.5.1 User-programmable fault reports
ACTUAL VALUES  RECORDS  USER-PROGRAMMABLE FAULT REPORTS
This menu displays the user-programmable fault report actual values. See the User-Programmable Fault Report section in
chapter 5 for information on this feature.
6.5.2 Starting records
ACTUAL VALUES  RECORDS  STARTING RECORDS  MOTOR START 1(5)
 DCMA INPUT xx


DCMA INPUT xx
0.000 mA
 RTD INPUT xx


RTD INPUT xx
-50 °C
 RRTD INPUT 1


RRTD INPUT 1
-50°C
 USER-PROGRAMMABLE
 FAULT REPORTS

NEWEST RECORD
NUMBER: 0

LAST CLEARED DATE:
2002/8/11 14:23:57

LAST REPORT DATE:
2002/10/09 08:25:27
NO STARTING RECORDS
TO REPORT
or
 MOTOR START 1


START 1 DATE:
2002/08/11
Range: Date in format YYYY/MM/DD

START 1 TIME:
00:00:00.000000
Range: Time in format HH:MM:SS.ssssss