GE MAC 600 - Connecting the ACDC Power Adapter

Maintenance
3.Insertanewbatteryasshowninthegure.
4.Replacethecoverofthebatterycompartment.
ConnectingtheACDCPowerAdapter
ThesystemcanrunusingACorbatterypower.WhentheunitispluggedintoanACoutlet,ituses
ACpowerandchargestheinstalledbattery.
ToconnectthesystemtoanACpoweroutlet:
1.ConnectthefemaleendoftheACDCpoweradaptertothepowerconnectorontheback
oftheunit(A).
2.PlugthemaleendofthepowercordintheACDCpoweradaptertotheACoutlet.
3.CheckthepowerLEDtomakesuretheunitisreceivingpowerfromtheACoutlet.
NOTE:
UseonlytheGEHealthcarerecommendedACDCpoweradapters.Thesystemrequiresa
workingbatteryforprintingECGreports.
2047426-001KMAC™600133