GE MAC 600 - Operating the System; Startup Screen

EquipmentOverview
Toloadtherollpaperintothedevice,dothefollowing:
1.OpentheWriterdoor.
2.Removetheleftoverpaperfromthespindleandslidethepaperrollontothespindle.
3.Placetheroll,withtheprintside(redgrid)facingthethermalprinthead,intothecompartment
byttingthespindleintothegroovesoneitherside.
4.UnrollthebeginningofthepaperandclosetheWriterdoor.
5.OverlaptheunrolledpaperontheWriterdoor.
6.SetthepapertypetoRollbyselectingSetup>ECG>WriterSetup>Paper.
TurningontheSystem
PressthePowerkeytoturnonthesystem.Afterthesystemhasturnedon,verifythefollowing:
lTheON/OFFLEDlightsup.
lThestartupscreenappearswithoutanyerrors,or,thesystempromptsyoutoenterthedate
andtime.
Enterthedateandtimeifprompted.
Ifyouencounteranyproblemspoweringonthesystem,see“GeneralTroubleshootingTips”on
page141fortroubleshootinginstructions
2047426-001KMAC™60051