GE PACSystems RX3i

Chapter 3. Configuration
54 PACSystems* RX3i & RSTi-EP PROFINET IO-Controller User Manual GFK-2571N
3.3.3 Configuring an Embedded RSTi-EP PROFINET Controller
CP100 support configuring LAN2 as an embedded PROFINET Controller. Instead of Configuring a PNC001 into a
rack/slot location (Figure 32), LAN2 in the target is configured as a PROFINET Controller (Figure 34).
Figure 34: CPE100/CPE115 Embedded PROFINET Controller Configured on LAN2