GE Analytical Instruments ©2010 67 of 226 DLM 74001-04 Rev. A
Chapter 4. Basic Analyzer Operation
Overview
The Sievers 500 RL On-Line TOC Analyzer utilizes a touch-sensitive color LCD for all menu selection activities. An
overview of the menu structure is given in “The Menu Screen” on page 69. An overview of hardware features
starts on page 96. Note that on configurations with a Sample Inlet Block rather than an iOS System, not all menu
options may be relevant or available on your Analyzer.
When the Analyzer is first powered on, the Startup screen displays basic GE Analytical Instruments contact
information and the firmware version number. The Analyzer then begins initialization to check the status of
consumables and prepare for taking measurements. When the Analyzer is done with initialization, the Main
screen automatically displays. If Password protection is enabled, you may be required to log in before starting
analysis or proceeding to the Menu screen. If DataGuard is enabled, you will be required to log in before starting
analysis or proceeding to the Menu screen.
The Main Screen
The Main screen provides the most important status and activity information for the Analyzer and offers you two
primary options:
• Press the Start Analysis button to initiate TOC measurements with the most current Analyzer settings.
Once analysis begins, the button changes to Stop Analysis.
• Press the Menu button to display the Menu screen and change the Analyzer’s settings.
To Next Page
Loading...
