Peripherals Installation
Versana Balance – Basic Service Manual System view 3-63
5808768-100 English Rev.9
3-8-3-11-4 Installation Procedure(continued)
3. After the power-up sequence is complete, press Utility on
the Control Panel. Select Connectivity-> Bluetooth, click
Add New Device.
NOTE: For Bluetooth Adapter connection, the operator must login
as Administrator.
Figure 3-52. Add New Device
4. Follow the Bluetooth pairing wizard to turn on Bluetooth on
your mobile device. Scan for surrounding devices. Then
select the device name of Versana Balance in your
surrounding device list to pair.
Figure 3-53. Bluetooth Pairing Wizard (1)
NOTE: Versana Balance system does not support to pair with Apple
device.
To Next Page
Loading...
