Setup reminders
Versana Balance – Basic Service Manual System view 3-3
5808768-100 English Rev.9
3-2 Setup reminders
3-2-1 Average setup time
• Unpacking the Versana Balance: 30 minutes
• Set up Versana Balance options: 30 minutes
• DICOM Network Configuration: 30 minutes or more,
depending on the configuration
• Install Insite: 0.5 hour
The Versana Balance installation and functional checkout will
take approximately 1 hour. Versana Balance consoles with
optional equipment may take slightly longer.
3-2-2 Setup warnings
WHEN USING ANY TEST INSTRUMENT THAT IS CAPABLE
OF OPENING THE AC GROUND LINE (I.E., METER’S
GROUND SWITCH IS OPEN), DON’T TOUCH THE
ULTRASOUND SYSTEM!
To prevent electrical shock, connect the unit to a properly
grounded power outlet. DO NOT use a three to two prong
adapter. This defeats safety grounding.
DO NOT wear the ESD wrist strap when you work on live
circuits and more than 30 V peak is present.
DO NOT operate this unit unless all board covers and frame
panels are securely in place. System performance and cooling
require this.
To Next Page
Loading...
