System Setup
3-18 System view Versana Balance – Basic Service Manual
5808768-100 English Rev.9
3-5 Preparing for setup
3-5-1 Verify customer order
Compare items received by the customer to that which is listed
on the delivery order. Report any items that are missing, back
ordered, or damaged.
3-5-2 Physical inspection
Verify that the system arrived intact (visual inspection).
If the system has been damaged, please refer to
‘Damage in
transportation’ on page i-16 in the beginning of this manual.
3-5-3 EMI protection
The Versana Balance has been designed to minimize the effects
of Electro-Magnetic Interference (EMI). Many of the covers,
shields, and screws are provided primarily to protect the system
from image artifacts caused by this interference. For this reason,
it is imperative that all covers and hardware are installed and
secured before the unit is put into operation.
See
2-2-4 ‘EMI limitations’ on page 2-9 for more information
about EMI protection.
To Next Page
Loading...
