Service Adjustments
6-4 System view Versana Balance – Basic Service Manual
5808768-100 English Rev.9
6-2-1 Region presetting procedure
The Region Presetting procedure:
• In Utility--> System--> General, select the correct region
from Preset Region (restart needed), refer to
Figure 6-1 on
page 6-4.
Figure 6-1. Region Preset
• The window below will display after the region being
selected. Select "Ok", refer to
Figure 6-2 on page 6-4.
Figure 6-2. Quesiton
• After "Ok" is selected, the window below will display.Select
"Ok" and then restart the system.
Figure 6-3. Restart the system
To Next Page
Loading...
