System Setup
3-16 System view Versana Balance – Basic Service Manual
5808768-100 English Rev.9
3-3-6-1 Moving into Position
Please refer to Basic User Manual on how to move the system.
3-3-7 Packing the Equipment
Please pack Versana Balance in the reverse order of unpacking.
6 Cut the cable ties around the four wheels.
7 Remove the foams beside the monitor.
8 Remove any additional packing material
surrounding the system.
9 Unlock the wheels, and then hold the control
panel at the front side to move the system until
the front two wheels on the ground and then
slowly move the whole system on the ground.
Table 3-6: Unpacking the Versana Balance
Step Description Corresponding Graphic
To Next Page
Loading...
