Connectivity setup
Versana Balance – Basic Service Manual System view 3-87
5808768-100 English Rev.9
3-9-4 Setup connection to a DICOM server(continued)
Table 3-29: Utility ->Connectivity ->Device screen
1Select MyComputer.
2 Assign an AE title to the Versana Balance. (AE stands for Application Entity. DICOM
services use this to identify the Versana Balance.) AE title is case-sensitive. This
title may contain the Computer Name from the TCP/IP page, if desired.
Note: It is NOT recommended to use the factory default. This is not prohibited, but
more than one system with the same AE title can cause confusion.
3 Edit Port Number if needed. 104 is typical. Save your changes and reboot the
system.
To Next Page
Loading...
