General procedures
Versana Balance – Basic Service Manual System view 4-35
5808768-100 English Rev.9
4-2-20 Cleaning the air filters(continued)
3. Remove the air filters on both side panels.
Figure 4-28. Remove the Filters
4. Dust the filters with a vacuum cleaner and/or wash it with a
mild soapy solution.
If washed, rinse and dry the filters before re-installation.
5. Re-install the clean filter in the reverse order of removal.
NOTE: Please align the 2 Pins with the 2 holes on both side panels
during installation.
Figure 4-29. Install the Filters
To Next Page
Loading...
