Common Service Desktop
Versana Balance – Basic Service Manual System view 7-33
5808768-100 English Rev.9
7-5-5-13 Connected Probes
Connected Probes shows probes connected to the Versana
Essential. The order on the user interface is top down matching
the left-to-right order on the Versana Essential.
The information on Connected Probes is available to all service
class licenses.
To access Connected Probes, navigate to Utility > Service >
Home.
Figure 7-25. Connected Probes
This table shows all the elements available on Connected
Probes with descriptions.
For more information, see:
7-5-5 ‘Home’ on page 7-16
Table 7-9: Connected Probes
Element DESCRIPTION
Active Probe Temperature
(Celsius)
When available, temperature of the active probe.
Not all probes report temperature. The most common probe to report
temperature is the TEE probe.
Probe Name Name of the probe connected to the Versana Essential.
Probe ID Identifier of the probe connected to the Versana Essential.
Status Statuses of the probe connected to the Versana Essential. Valid values are:
• Active
• Non Active
To Next Page
Loading...
