GE Voluson P8 - Section 8-13 Remove the Pedestal Bottom Cover

GE HEALTHCAREDRAFT VOLUSON® P8 / VOLUSON® P6
DIRECTION 5459672-100, R
EVISION 6 DRAFT (JANUARY 17, 2013) PROPRIETARY SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-29
Section 8-13
Remove the Pedestal Bottom Cover
3.) Unscrew 2 screws located in the Pedestal Front Cover and remove the part. Refer to the above
figure.
4.) Unscrew 2 screws of POWER CORD FIX BRACKET. Then disconnect POWER CORD. Refer to
the figure below.
Figure 8-31 Unscrewing 1 screw
Figure 8-32 Disconnecting POWER CORD
PEDESTAL
BOTTOM COVER
PEDESTAL FRONT
COVER
POWER CORD FIX BRACKET