109109
DSP DESIGNER TUTORIAL
During the conversion process, the original files are copied and given temporary
filenames. The DSP Designer will then perform the resolution change on the
selected files. These modified files are then loaded into the DSP Designer
in place of the original files. The updated files will have the “_Edited” string
appended to the filename, as shown below:
Updated Files
The DSP Designer performs a nondestructive conversion of the original files
should they need to be used at a later time.
In the Browser Window, under the \mediafiles directory, both sets of files will
now be present:
Original media files
Edited media files
To Next Page
Loading...
