116
Remote Controls > Format
Formats the DSP internal hard drive.
This operation will erase all data from the hard drive!
Remote Controls > Abort Commands
Use the Abort Commands button to halt all commands which have been sent to
the DSP.
Remote Controls > Send Schedule
Uploads the media to the DSP device. This may take anywhere from few sec-
onds to a several minutes depending on the media size and the network speed.
The command may be aborted any time during the upload process by pressing
the Abort Schedule button.
Remote Controls > Abort Schedule
Sends an abort message in order to cancel the Send Schedule process.
Remote Controls > Upgrade Device
Updates the DSP to the latest version of fi rmware. The fi rmware can be retrieved
from a USB storage device.
DSP SERVER SOFTWARE
To Next Page
Loading...
