Gefen EXT-HD-DSP - Page 24

Network > Network Device
• Choose a network connection device. Ethernet is the only option.
Network > DHCP
• Choose to enable or disable the use of DHCP (Dynamic Host Confi guration
Protocol). When DHCP is enabled and a DHCP server is located on the
network, an IP address will automatically be assigned to the DSP.
Network > MAC
• This will display the DSP’s MAC address.
Network > IP
• Displays the DSP IP address.
The IP cannot be confi gured option is not confi gurable when DHCP is
ON.
Network > Subnet Mask
• The subnet mask cannot be confi gured when DHCP is ON.
• This will display the DSP’s subnet mask.
Network > Gateway
• This option is not confi gurable when DHCP is ON.
• This will display the DSP’s gateway address.
Network > DNS1 Server
• This will display the DSP’s DNS 1 server address.
• This option can always be modifi ed.
• The confi guration window that opens for this option will allow confi guration of
both DNS 1 & 2 addresses.
Network > DNS2 Server
• This will display the DSP’s DNS 2 server address.
• The confi guration window that opens for this option will allow confi guration of
both DNS 1 & 2 addresses.
Always use the “Apply” function at the bottom of each tab before
changing tabs. Otherwise changes made in the tab will not be
saved.
19
CONFIGURING THE HI DEF DIGITAL SIGNAGE PLAYER