ADP200 Application PID-IMM User Manual Pag. 36 of 80
Figure 21: Commands Digital Intput Configuration
The PID IMM Fw1.0.0 version do not change any commands with IPA 11014 AutoSetup.
Starting from Fw1.0.1, the AutoSetup operation configure also these commands
No digital input are programmed in the forward – reverse control:
Forward Reverse Control:
IPA 1042 FR forward src = Null
IPA 1044 FR reverse src = Null
Figure 22: Forward Reverse Control
COMMANDS CONTROL
IPA 1000 Commands remote sel = Terminal
IPA 1016 Terminal Start Src = Digital Input 1X mon
Figure 23: Commands Management
In the above scheme Fault Reset is to Digital input 5x
IPA 4500 Fault reset src = Digital input 5x mon
To Next Page
Loading...
