ADP200 Application PID-IMM User Manual Pag. 4 of 80
1 Introduction
This manual contains all the information necessary for wiring and configuration of a system based on the
application Pressure/Flow Control for hybrid injection molding machines (PID-IMM) for ADP200 drive.
Chapter 2 - "General description" provides information about system characteristics and functions.
Chapter 3 - "Connection diagrams and system interface" illustrates typical connection diagrams and the
command interface for controlling the application via digital I/O or fieldbus.
Chapter 4 - "Commissioning" provides information about installing the application on the ADP200 drive.
Chapter 5 - "Application functions List of Parameters" contains detailed information about application functions,
operating modes and the complete list of system parameters.
Chapter 6 – “Application Alarm” explain all the PID-IMM application alarms.
To Next Page
Loading...
Need help?
General