gefran ADP200 User Manual

ADP200 Application PID-IMM User Manual Pag. 75 of 80
Auto SoftScope Setup Reserved
SoftScope Mem En Reserved
SoftScope Par Mem En Reserved
Motor Torque Motor torque monitor. (*)
Speed Feedback Speed feedback monitor. (*)
Pressure Fbk Pressure feedback monitor.
Speed Ref Mon Int Speed reference monitor.
Pressure Ref Mon Int Pressure reference monitor.
Speed Ref Ext Speed reference from external PLC (before Ramps) monitor
Pressure Ref Ext Pressure reference from external PLC (before Ramps) monitor
Derivative Fbk Derivative Fbk
Derivative Fbk Filt Derivative Fbk Filtered
P-Output Proportional feed-back monitor
D-Output Derivative feed-back monitor
I-Output Integrative feed-back monitor
Est Gain (P/Q) Estimated Q/P Gain
Basic Run State Basic run state (ON (1), OFF (0) )
Control Mode Actual Control Mode
0 = Pressure
1= Speed/Flow
(*) TORQUE an SPEED is displayed according the pump direction convention. Example is the direction is
negative and motor speed [260*] is negative, the Speed Feedback [12006*] show the same value but
positive.

gefran ADP200 Specifications

General

Brand	gefran
Model	ADP200
Category	Inverter
Language	English