ADV200 WA • Quick start up guide - Specification and installation 133
• hardware dead time compensation
• alarm signal management (including local diagnostics via LED)
• temperature signal management.
INT-P-ADV-SLAVE card
The INT-P-ADV-SLAVE card interfaces between the power section of the slave
unit and the master unit. It also performs the following functions:
• alarm signal management (including local diagnostics via LED)
• temperature signal management.
INT-SLAVE card
The INT-SLAVE interface card manages communication between a master unit
and a slave unit.
The INT-SLAVE cards are mounted on the master unit, their number correspond-
ing to that of the slaves that are connected (max. 4 slaves).
The INT-SLAVE card is factory-set.
To Next Page
Loading...
