gefran AFE200 Series

114 AFE200 • Instruction Manual
14.3.29 4090 Fieldbus M->S8 ipa FBM2SIPA 0 0 0 R
14.3.33 4100 Fieldbus M->S9 ipa FBM2SIPA 0 0 0 R
14.3.37 4110 Fieldbus M->S10 ipa FBM2SIPA 0 0 0 R
14.3.41 4120 Fieldbus M->S11 ipa FBM2SIPA 0 0 0 R
14.3.45 4130 Fieldbus M->S12 ipa FBM2SIPA 0 0 0 R
14.3.49 4140 Fieldbus M->S13 ipa FBM2SIPA 0 0 0 R
14.3.53 4150 Fieldbus M->S14 ipa FBM2SIPA 0 0 0 R
14.3.57 4160 Fieldbus M->S15 ipa FBM2SIPA 0 0 0 R
14.3.61 4170 Fieldbus M->S16 ipa FBM2SIPA 0 0 0 R
Setting of the parameter to associate with the bus channel. The default setting is 0,
which means channel not active.
If the parameter to be connected is a sorg (source), the channel and parameter can
also be associated by modifying the sorg parameter in its menu.
When setting a parameter, the format is also automatically set in the sys parameter.
Menu PAR Description UM Type FB BIT Def Min Max Acc
14.3.2 4022 Fieldbus M->S1 sys ENUM Not assigned 0 10 RW
14.3.6 4032 Fieldbus M->S2 sys ENUM Not assigned 0 10 RW
14.3.10 4042 Fieldbus M->S3 sys ENUM Not assigned 0 10 RW
14.3.14 4052 Fieldbus M->S4 sys ENUM Not assigned 0 10 RW
14.3.18 4062 Fieldbus M->S5 sys ENUM Not assigned 0 10 RW
14.3.22 4072 Fieldbus M->S6 sys ENUM Not assigned 0 10 RW
14.3.26 4082 Fieldbus M->S7 sys ENUM Not assigned 0 10 RW
14.3.30 4092 Fieldbus M->S8 sys ENUM Not assigned 0 10 RW
14.3.34 4102 Fieldbus M->S9 sys ENUM Not assigned 0 10 RW
14.3.38 4112 Fieldbus M->S10 sys ENUM Not assigned 0 10 RW
14.3.42 4122 Fieldbus M->S11 sys ENUM Not assigned 0 10 RW
14.3.46 4132 Fieldbus M->S12 sys ENUM Not assigned 0 10 RW
14.3.50 4142 Fieldbus M->S13 sys ENUM Not assigned 0 10 RW
14.3.54 4152 Fieldbus M->S14 sys ENUM Not assigned 0 10 RW
14.3.58 4162 Fieldbus M->S15 sys ENUM Not assigned 0 10 RW
14.3.62 4172 Fieldbus M->S16 sys ENUM Not assigned 0 10 RW
Setting of the format of the datum received on the channel. When the src parameter
is programmed, the format is automatically programmed on the relative sys. If the src
parameter is reset to null, the format does not change. The value of the format can be
selected from the following list, according to the parameter selected as the source:
0 Not assigned
1 Count 16
2 Count 32
3 Fill 16
4 Fill 32
5 Mdplc 16
6 Mdplc 32
7 EU
8 Eu oat
9 Par 16