gefran AFE200 Series

68 AFE200 • Instruction Manual
Menu PAR Description UM Type FB BIT Def Min Max Acc
1.17 1066 Enable state mon BIT 16 0 0 1 R
The drive Enable command status is displayed. Voltage must be present on terminal
7. The FR Forwardstart command is needed to start the AFE200.
0 Disabled drive disabled
1 Enabled drive enabled
Menu PAR Description UM Type FB BIT Def Min Max Acc
1.18 1100 Digital input mon UINT16 16 0 0 0 R
The status of the digital inputs on the drive is displayed. It can also be read via a serial
line or eldbus. The data are contained in a word, where each bit is 1 if voltage is sup-
plied to the corresponding input terminal.
0 Input disabled
1 Input enabled
I.e. : 000000000011
000000000011
Active DI 1Active DI 2
Menu PAR Description UM Type FB BIT Def Min Max Acc
1.19 1300 Digital output mon UINT16 0 0 0 R
The status of the digital outputs on the drive is displayed. It can also be read via a se-
rial line or eldbus. The data are contained in a word, where each bit is 1 if voltage is
supplied to the corresponding input terminal.
0 Output disabled
1 Output enabled
I.e. : 000000000011
000000000011
Active DO 1Active DO 2
Menu PAR Description UM Type FB BIT Def Min Max Acc
1.20 1200 Digital input X mon UINT16 16 0 0 0 R
The status of the digital inputs of the expansion card is displayed. It can also be read
via a serial line or eldbus. The data are contained in a word, where each bit is 1 if
voltage is supplied to the corresponding input terminal.
0 Input disabled
1 Input enabled
I.e. : 000000000011