Gema MagicControl 4.0 Operating Instructions

Rev. 00 08/17
12

Product description MagicControl 4.0 (CM40)
For further information, also refer to the enclosed Declaration of
Conformity.
European directives RL
EG-RL
2006/42/EU
Machinery
EG-RL
2014/34/EU
Equipment and Protective Systems in Potentially
Explosive Atmospheres (ATEX)
EG-RL
2014/30/EU
Electromagnetic compatibility
EN European standards
EN 50177
Stationary electrostatic application equipment for
ignitable liquid coating material - Safety
requirements
EN 50050-2
Electrostatic equipment for areas where there is
danger of explosion – electrostatic hand-held
equipment
Part 2: Electrostatic hand-held spraying
equipment
IEC/EN 60950
Safety of information technology equipment
UL 61010-2-201
Industrial controls, section "Requirements for the
place of installation"
DIN EN 60529
Degrees of protection provided by enclosures (IP
Code)
NEMA 250-2003
Enclosures for electrical equipment (1000 Volts
maximum)
DIN EN 60898-
1:2006-03
Electrical accessories - Circuit-breakers for
overcurrent protection for household and similar
installations
EN 50178
Electronic equipment for use in power
installations
IEC/EN 61131-2
Programmable controllers, Equipment
requirements and tests
EN 12981
Coating plants – spray booths for application of
organic powder coating material - Safety
requirements
Recognized safety-related regulations
764 / DGUV
Information
209-052
Electrostatic coating
Trade Union information concerning health and
safety during work (BGI)

Gema MagicControl 4.0 Specifications

General

Brand	Gema
Model	MagicControl 4.0
Category	Control Unit
Language	English