Gema MagicControl 4.0 - Log-Out; Change User; User Profile

Rev. 00 08/17
50

Operation MagicControl 4.0 (CM40)
Fig.
41
:
Log-out
The user can log out in two ways:
– By switching off the plant (See chapter "Switching off the plant" on
page 39.)
– By pressing the symbol in the log-in status bar
 User is logged off
Change user
The user change takes place by logging out and in.
User profile
Depending on user rights, individual functions and settings may
not be accessible and are locked.
– See chapter "Functions available at user level" on page 22.
Create user
1. Press the key
The following page is displayed: