Gema MagicControl 4.0 Operating Instructions

Rev. 00 08/17
66

Maintenance / Repairs MagicControl 4.0 (CM40)
Gun nozzles
Next page
Gun group selection
Gun
Desired, input values for the service life in hours:
Injector safety nozzle Input range 1 - 200
Powder hose Input range 1 - 3000
Gun electrode Input range 1 - 700
Gun nozzle Input range 1 - 700
Individual value input or per group if gun group is selected
(orange)
Countdown, shows the remaining hours to change wearing parts
Reset, reset to 100% after change of wearing parts
Key for individual or per group reset
Back to the main menu
Leave current page or return to main menu
– Value can be edited in User Level 2
Customer profile
1. Press the key
The following page is displayed:
Fig.
65
:
Input of specific basic data????
Average max. powder output of all guns
Percentage of sprayed powder on the component
Average area output of the guns
Date input of the next maintenance date due

Gema MagicControl 4.0 Specifications

General

Brand	Gema
Model	MagicControl 4.0
Category	Control Unit
Language	English