Gema MagicControl 4.0 Operating Instructions

Rev. 00 08/17
MagicControl 4.0 (CM40) Operation

29
Operation
Operation
During the initial commissioning of the device, the functional
check is to be performed without powder!
Starting the plant
1. Turn the main switch to the ON position.
– The plant control starts the operating system, the PLC control
and the operating software to the start page.
Fig.
9
: Start page
2. Touch the screen
– The screen switches to the main page:

Gema MagicControl 4.0 Specifications

General

Brand	Gema
Model	MagicControl 4.0
Category	Control Unit
Language	English