Gema MagicControl 4.0 - Operating Data Management (LM); Machine Utilization

Rev. 00 08/17
MagicControl 4.0 (CM40) Maintenance / Repairs

63
Climatic ambient conditions
Air pressure (operation)
795 - 1080 hPa
max. 2000 m ü. NHN
Temperature (operation)
± 0 – +50 °C (+32 – +122 °F)
Temperature (storage / transport)
-20 – + 60 °C (-4 – +140 °F)
Air humidity
Relative air humidity 10 - 95 %
Condensation
Non-condensing
Whilst the operating panel has a robust design, the built-in components
are sensitive to excessive vibrations and/or shocks.
The operating panel must be protected from mechanical loads outside its
intended use.
The operating panel may only be transported in the appropriate
packaging and in the correct manner.
Before recommissioning
During storage and transport in cold weather, and in the event of extreme
temperature differences, ensure that no moisture is deposited on or inside
the unit (condensation).
If condensation is present, the unit may only be switched on after it is fully
dry.
Operating data management (LM)
The display shows the hours (h) with a definition of 1/100 h = 0.6 mins.
1. Press the key
The following page is displayed:
Fig.
61
:
Machine utilization
1. Press the key