Generac Power Systems Power Zone 410 User Manual

22 Owner’s Manual for Power Zone Gateway on PZ 410
Installation and Operation
Figure 3-37. Enable SNMP Agent
Figure 3-38. Select SNMP Version
Configure SNMPv2c
Figure 3-39. SNMPv2c
Letter Setting Name
A Function settings.
B Select SNMP Version.
C
Select to use authentication; further settings
available after making selection.
D Save Changes.
014614
014613
D
C
B
A
Letter Setting Name
D Shows Security Settings Tab.
E Select SNMP version SNMPv2c.
F Enable Authentication.
G
Add Community. Multiple Communities can
be specified, each with their own name and
access level.
H Delete entry.
J Community name.
K
Access Level (None, Read Only, Read
Write).
L Save settings.
014612
F
G
H
J
K
L
E
D

Generac Power Systems Power Zone 410 Specifications

General

Brand	Generac Power Systems
Model	Power Zone 410
Category	Controller
Language	English