32
Align the “T” mark on the flywheel with the index mark
on the alternator cover by turning the flywheel counter -
clockwise.
Position the camshaft gear with cam chain so that its
“I” mark aligns with the cylinder head surface and the
circle hole forwards front.
Install the dowel pins and camshaft holder.
Tighten the washers and nuts.
TORQUE: 20 n-m (2.0 kg-m)
Adjust the clearance between the rocker arm and
valve stem by applying a feeler gauge.
STANDARD VALVE: 0.08 mm
To Next Page
Loading...
