EasyManuals Logo

Genesis KBE2 User Manual

Genesis KBE2
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
I. INTRODUCTION
Thank you for purchasing the GENESIS® KBE2 Series Inverter. KB Electronics, Inc.
is committed to providing total customer satisfaction by providing quality products
that are easy to install and operate.
The KBE2 is available in IP-20 Panel Mount and NEMA-4 / IP-65 (indoor) enclosures.
They operate 3-phase AC induction motors thru 3 HP. Several models are available
with 115, 208/230, and 380/460 Volts AC - 50/60 Hz AC line input. They contain a
3-digit LED display with a digital keypad for simplified programming. Although very
compact, the KBE2 contains many user-friendly features found in more costly drives.
This product should be installed and serviced by a qualified technician, electri-
cian, or electrical maintenance person familiar with its operation and the haz-
ards involved. Proper installation, which includes wiring, mounting in proper enclosure, fus-
ing or other over current protection, and grounding can reduce the chance of electrical
shocks, fires, or explosion in this product or products used with this product, such as elec-
tric motors, switches, coils, solenoids, and/or relays. Eye protection must be worn and
insulated adjustment tools must be used when working with control under power. This
product is constructed of materials (plastics, metals, carbon, silicon, etc.) which may be a
potential hazard. Proper shielding, grounding, and filtering of this product can reduce the
emission of radio frequency interference (RFI) which may adversely affect sensitive electron-
ic equipment. If further information is required on this product, contact the Sales
Department. It is the responsibility of the equipment manufacturer and individual installer
to supply this Safety Warning to the ultimate end user of this product. (SW effective
11/1992).
This drive contains electronic Start/Stop circuits that can be used to start and stop the
drive. However these circuits are never to be used as safety disconnects since they are
not fail-safe. Use only the AC line for this purpose.
Be sure to follow all instructions carefully. Fire and/or electrocution can result due to
improper use of this product.
!
Definition of Safety Warning Symbols:
Electrical Hazard Warning Symbol – Failure to observe this warning could
result in electrical shock or electrocution.
Operational Hazard Warning Symbol – Failure to observe this warning
could result in serious injury or death.
ii. SAFETY WARNING
!
This product complies with all CE directives pertinent at the time of manufac-
ture. Contact the Sales Department for Declaration of Conformity.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Genesis KBE2 and is the answer not in the manual?

Genesis KBE2 Specifications

General IconGeneral
BrandGenesis
ModelKBE2
CategoryDC Drives
LanguageEnglish